Northgate Fireplace Removal

Fireplace Removal/Fireplace Demolition/Chimney Removal Services

Fireplace removal contractor

We provide professional fireplace removal, from fireboxes and chimney terminations to clean, safe demolition and debris haul-off. Every job is completed with proper dust control and code-aware venting considerations. Request a quote today.

When do you need fireplace removal instead of just using it less?

If the fireplace is leaking smoke or water, or you’re seeing cracked mortar, spalling brick, or heavy creosote buildup, removal is often the safer choice. A neglected opening can also become a major path for cold air and pests, and an abandoned chimney can still draw flue gases into the home through gaps. People can “leave it and forget it,” but masonry failure and hidden soot in the chase often turn into harder-to-fix problems later.

What does a full fireplace removal include?

Full removal means taking out the firebox and any accessible chimney or liner sections down to the point where the remaining structure can be safely sealed. We typically disconnect the damper and smoke path, remove firebrick and metal components, then rebuild or patch the opening with noncombustible materials to restore the wall and hearth structure. From there, the top of the chimney run is addressed—either capped and sealed as required or removed—so you’re not left with an open flue channel pulling in air and moisture.

Why does a removed fireplace still cause odor or airflow problems?

Usually not from the firebox itself—most lingering issues come from the flue path, the chase cavity, or gaps around old chimney penetrations. If the chimney wasn’t fully sealed, you can get odors from the masonry voids, along with noticeable drafts or cold spots caused by stack effect. That’s why we seal and transition the roof and attic envelope correctly where the chimney used to connect, not just at the hearth opening.

Can you remove a fireplace without removing the chimney entirely?

Yes, but only if the remaining chimney section is properly sealed above and below the connection points with approved noncombustible materials. A partial removal can still leave an air channel that pulls odors and moisture through the masonry, especially in basements and upper chases. If you’re dealing with a damaged liner or active water intrusion, full removal or a proper rebuild-and-seal approach is usually the safer option.

How Much Does Fireplace Removal Cost?

Fireplace removal typically costs between $650 and $2,100 for a one-time project. The total depends on whether the crew needs to remove the full chimney liner and rebuild the surrounding noncombustible wall and hearth. Pricing also reflects how much masonry demolition is required for a damaged firebox, along with the dust-control conditions and debris haul-off needs at your site.

Our Service Area

We provide services nationwide, including in the following cities:

Alabama

Alaska

Arizona

Arkansas

California

Colorado

Connecticut

District of Columbia

Florida

Georgia

Hawaii

Idaho

Illinois

Indiana

Iowa

Kansas

Kentucky

Louisiana

Maine

Maryland

Massachusetts

Michigan

Minnesota

Mississippi

Missouri

Montana

Nebraska

Nevada

New Hampshire

New Mexico

New York

North Carolina

North Dakota

Ohio

Oklahoma

Oregon

Pennsylvania

Rhode Island

South Carolina

South Dakota

Tennessee

Texas

Utah

Vermont

Virginia

Washington

West Virginia

Wisconsin

Wyoming